Maxwell RC8-8 Vertical 12v Windlass for 5/16″ Chain & 5/8″ Line
The 12-volt Maxwell RC8-8 vertical windlass is designed for 5/16-inch chain and 5/8-inch line. Its gypsy-focused configuration supports consistent rode engagement during powered retrieval, helping boat owners reduce manual hauling and maintain better control throughout anchor deployment and recovery.
Description
SET
Maxwell RC8-8 Low Profile Specs
| Brand | Maxwell |
| Full Model Code / Part Number | RC8-8 Low Profile (P102980) |
| Country of Origin | New Zealand |
| Windlass Type / Orientation | Vertical, Low Profile |
| Power Supply / Drive System | 12V DC |
| Motor Wattage / Rating | 600W |
| Maximum Pull / Breakaway Power | 350 kg / 770 lbs |
| Working Load / Continuous Pull | 115 kg / 253 lbs |
| Max Retrieval Speed | 28 m/min (92 ft/min) |
| Chain Gypsy Size & Standard | 5/16" (8mm) Short Link / HT |
| Rope Size Capability | 5/8" (16 mm) 8-Plait or 3-Strand |
| Capstan / Drum Option | No |
| Material & Finish | Chrome Marine-Grade Bronze |
| Current Draw / Circuit Breaker Rating | 80 Amps |
| Deck Thickness Range | 25 - 65 mm |
| Net Weight | 13.5 kg / 29.7 lbs |
| Included Switchgear / Control System | Dual Direction Solenoid, Emergency Clutch Handle |
| IP Rating | IP66 |
| Standard Warranty | 3 Years |
| Application | Boats from 8m to 11m (26ft - 36ft), max displacement 6,000 kg, target anchor weight up to 15 kg |
Common Question of Maxwell RC8-8
What chain and line fit?
The Maxwell RC8-8 vertical windlass is listed for 5/16-inch chain and 5/8-inch line. Confirm chain grade, link profile, rope construction, splice, gypsy engagement, battery capacity, breaker rating, and anchor rode compatibility before installation.
Does this model include a capstan?
No. The supplied title identifies the Maxwell RC8-8 as a vertical windlass for chain and line but does not mention a capstan. Confirm the exact package contents before purchase. Verify controls, deck clearance, battery, and marine anchor retrieval requirements.
What voltage does it use?
It uses 12 volts according to the product listing. Confirm battery capacity, cable gauge, circuit breaker, switch arrangement, grounding, and motor connections before wiring. Proper electrical installation supports dependable operation of this electric anchor windlass.
You must be logged in to post a review.
Reviews
There are no reviews yet.