Honda 225HP BF225DK1URA White Outboard Motor – 30″ Shaft
The white 225-horsepower Honda BF225DK1URA outboard motor uses a 30-inch shaft for compatible high-transom boats. Its propulsion output supports offshore cruising and fishing, while proper shaft matching helps maintain effective thrust transfer and handling.
Description
SET
Honda 225HP BF225DK1URA White Outboard Motor Specs
| Brand | Honda Marine |
| Full Model Code / Part Number | BF225DK1URA (White / Standard Rotation / Mechanical / 30" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 225 HP (168 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5000 - 6000 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start |
| Steering System | Remote Mechanical Steering Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 1.86:1 (Standard Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XXL: 30 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Honda 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 287 kg / 633 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Honda BF225DK1URA White
Is the white URA fuel injected?
Yes. The white Honda BF225DK1URA uses Honda’s electronic fuel injection system and a 225-horsepower four-stroke powerhead. Its white finish identifies exterior color, while the 30-inch shaft suits tall-transom applications. This configuration provides a high performance outboard motor option for compatible boats and properly matched rigging.
What shaft length does it have?
The shaft length is 30 inches, intended for a corresponding tall transom. Confirm the boat’s actual measurement before installation because incorrect shaft length can affect cooling-water pickup, gearcase position, propeller immersion, steering response, and trim. Proper measurement supports this ready to bolt marine outboard package.
Is it suitable for repowering?
Yes, when the boat is rated for 225 horsepower and has a compatible 30-inch transom. Verify transom strength, steering hardware, control system, battery capacity, wiring, fuel supply, and engine weight before repowering. Professional installation helps ensure correct mounting, cooling-water flow, rigging adjustment, and safe operation.
You must be logged in to post a review.
Reviews
There are no reviews yet.