Tohatsu 250HP BFT250DXDA DBW Outboard – 25″ Shaft Controls
The 250-horsepower Tohatsu BFT250DXDA provides DBW controls with a 25-inch shaft for compatible transoms. Electronic operation supports responsive throttle and shift commands, while the shaft length helps maintain propeller alignment and predictable propulsion performance.
Description
SET
Tohatsu 250HP BFT250DXDA DBW Outboard Specs
| Brand | Tohatsu Marine (Honda Powered) |
| Full Model Code / Part Number | BFT250DXDA (Standard Rotation / DBW / 25" Shaft) |
| Country of Origin | Japan / USA |
| Engine Type & Configuration | 4-Stroke SOHC 60° V6 (24-Valve VTEC) |
| Horsepower Output (HP / kW) | 250 HP (184 kW) |
| Displacement (cc / cu in) | 3583 cc (219 cu in) |
| Bore x Stroke (mm / in) | 89.0 x 96.0 mm (3.50 x 3.78 in) |
| Maximum RPM Range (Full Throttle Operating Range) | 5300 - 6300 RPM |
| Fuel Induction System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Microcomputer Controlled Transistorized |
| Starting System | Electric Start with Drive by Wire (DBW) |
| Steering System | Electronic Remote Control Compatible |
| Trim & Tilt System | Power Trim & Tilt |
| Gear Ratio & Shift Mechanism | 2.00:1 (Standard Rotation / F-N-R) |
| Exhaust System | Through Prop Hub |
| Recommended Transom Shaft Length | XL: 25 inches |
| Alternator / Charging Output (Amps / Watts) | 90 Amp (Total / 60 Amp Battery Charging) / 1080 Watts |
| Recommended Fuel Grade & Oil Type | Regular Unleaded (Min. 86 Octane) / Tohatsu 4-Stroke FC-W 10W-30 |
| Dry Weight (kg / lbs) | 280 kg / 617 lbs |
| Standard Warranty | 5 Years Limited Pleasure Warranty |
Common Question of Tohatsu BFT250DXDA
What does BFT250DXDA DBW mean?
It identifies a Tohatsu 250-horsepower outboard with Drive-by-Wire controls, a 25-inch shaft, and the controls noted in the listing. DBW uses electronic throttle and shift commands. Confirm the control head, harnesses, gauges, battery, steering, and fuel system before installing this high performance outboard motor.
What transom fits its shaft?
A 25-inch transom is the intended match for this DXDA configuration. Measure the hull before purchase because incorrect shaft length can affect cooling-water pickup, gearcase clearance, propeller immersion, steering response, and trim. Correct measurement supports a properly fitted ready to bolt marine installation.
Does it require electronic controls?
Yes. The DBW designation requires compatible electronic controls and rigging components rather than ordinary mechanical cables at the engine. Confirm the control head, wiring harness, gauges, battery capacity, steering equipment, programming, and installation requirements before purchase and operation.
You must be logged in to post a review.
Reviews
There are no reviews yet.